Front fog lamp – Dodge 2010 Viper - Owner Manual User Manual

Page 257

Advertising
background image

WARNING!

A transient high tension occurs at the bulb sockets of
High Intensity Discharge (HID) headlamps when the
headlamp switch is turned ON. It may cause serious
electrical shock or electrocution if not serviced prop-
erly. See your authorized dealer for service.

NOTE:

• When the High Intensity Discharge (HID) headlamps

are turned on, there is a blue hue to the lamps. This
diminishes and becomes more white after approxi-
mately 10 seconds as the system charges.

• If High Intensity Discharge (HID) headlamps are not

working, cycle the headlamp switch four times to see
if it will restrike.

Front Fog Lamp

1. Remove the push pin from the upper outer corner of
the splash shield and remove the splash shield.

7

MAINTAINING YOUR VEHICLE

253

Advertising