With keyless enter-n-go — if equipped – Dodge 2011 Charger - Owner Manual User Manual
Page 456
Advertising
4. Using a screwdriver or similar tool, press and hold the
override tab through the access port on the center con-
sole.
5. Move the shift lever into the NEUTRAL position.
6. The vehicle may then be started in NEUTRAL.
7. Reinstall the rubber tray into the storage bin.
With Keyless Enter-N-Go — If Equipped
If the engine is running, press the START/STOP button to
turn it off. Release the brake pedal and press the START/
STOP button once or twice to go to the ON/RUN
position. Do not start the engine. Then, follow the in-
structions shown above to activate the override.
Shift Lever Override
454
WHAT TO DO IN EMERGENCIES
Advertising
This manual is related to the following products: