License lamp – Dodge 2011 Charger - Owner Manual User Manual
Page 511
Advertising
![background image](/manuals/603187/511/background.png)
License Lamp
1. Remove the screws securing the lamp to the rear
fascia.
2. Remove the bulb and socket assembly.
3. Disconnect the bulb from the socket assembly and
install the replacement bulb.
4. Reinstall the bulb and socket assembly.
5. Reattach the lamp to the rear fascia, and then install
the screws.
1 — License Lamp Bulb
2 — Socket
7
MAINTAINING YOUR VEHICLE
509
Advertising
This manual is related to the following products: