Rear tail, stop, turn signal, and backup lamp, Rear tail, stop, turn signal, and backup, Lamp – Dodge 2011 Nitro - Owner Manual User Manual

Page 444

Advertising
background image

3. Firmly grasp the bulb by the two latches and squeeze
them together to unlock the bulb from the front fog lamp
housing.

4. Pull the bulb straight out from the keyed opening in
the housing.

CAUTION!

Do not touch the new bulb with your fingers. Oil
contamination will severely shorten bulb life. If the
bulb comes in contact with any oily surface, clean the
bulb with rubbing alcohol.

Rear Tail, Stop, Turn Signal, and Backup Lamp

1. Open the lift gate.

2. Remove the two push pins.

Push Pins

7

MAINTAINING YOUR VEHICLE

441

Advertising
This manual is related to the following products: