Center high mounted stop lamp (chmsl), Center high mounted stop lamp, Chmsl) – Dodge 2011 Nitro - Owner Manual User Manual
Page 445
Advertising
3. Pull lamp straight back and disconnect electrical con-
nection.
4. Remove the two screws attaching the backplate to the
lamp assembly.
5. Pull the backplate straight back from the lamp hous-
ing.
6. Disconnect the electrical connector.
7. Remove the bulb from the backplate.
Center High Mounted Stop Lamp (CHMSL)
1. Remove the two screws securing the CHMSL.
2. Disconnect the electrical connector and washer hose (if
equipped) from the CHMSL.
3. Replace the CHMSL.
Screw Locations
442
MAINTAINING YOUR VEHICLE
Advertising
This manual is related to the following products: