Loose fuel filler cap message, Vehicle loading, Vehicle certification label – Dodge 2012 Challenger - Owner Manual User Manual

Page 336

Advertising
background image

• When the fuel nozzle “clicks” or shuts off, the fuel

tank is full.

Loose Fuel Filler Cap Message
If the vehicle diagnostic system determines that the fuel

filler cap is loose, improperly installed, or damaged, a

”gASCAP” message will display in the odometer or a

“Check Gascap” message will display in the Electronic

Vehicle Information Center (EVIC) (if equipped). If this

occurs, tighten the fuel filler cap properly and press the

TRIP ODOMETER button to turn off the message. If the

problem continues, the message will appear the next time

the vehicle is started.
A loose, improperly installed, or damaged fuel filler cap

may also turn on the MIL. Refer to “Onboard Diagnostic

System” in “Maintaining Your Vehicle” for further

information.

VEHICLE LOADING
The load carrying capacity of your vehicle is shown on

the “Vehicle Certification Label.” This information

should be used for passenger and luggage loading as

indicated.
Do not exceed the specified Gross Vehicle Weight Rating

(GVWR) or the Gross Axle Weight Rating (GAWR).
Vehicle Certification Label
Your vehicle has a Vehicle Certification Label affixed to

the rear of the driver’s door.
The label contains the following information:

• Name of manufacturer
• Month and year of manufacture
• Gross Vehicle Weight Rating (GVWR)
• Gross Axle Weight Rating (GAWR) front

334 STARTING AND OPERATING

Advertising