Turn signals, Lane change assist, High/low beam switch – Dodge 2012 Challenger-SRT - Owner Manual User Manual

Page 145

Advertising
background image

Turn Signals
Move the multifunction lever up or down and the arrows

on each side of the instrument cluster flash to show

proper operation of the front and rear turn signal lights.

NOTE:
• If either light remains on and does not flash, or there is

a very fast flash rate, check for a defective outside light

bulb. If an indicator fails to light when the lever is

moved, it would suggest that the indicator bulb is

defective.

• A “Turn Signal On” message will appear in the Elec-

tronic Vehicle Information Center (EVIC) and a con-

tinuous chime will sound if the vehicle is driven more

than 1 mile (1.6 km) with either turn signal on.

Lane Change Assist
Tap the lever up or down once, without moving beyond

the detent and the turn signal (right or left) will flash

three times then automatically turn off.

High/Low Beam Switch
Push the multifunction lever away from you to switch

the headlights to high beam. Pull the multifunction lever

toward you to switch the headlights back to low beam.

Multifunction Lever

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE 143

Advertising