Security, Cd player — if equipped, Operation instructions — universal serial – Dodge 2013 Dart - Owner Manual User Manual

Page 352: Bus (usb)

Advertising
background image

NOTE:

• The head unit will have no control of the AUX device.

You can only control the volume on the head unit. No
information about the song will be displayed.

• The AUX device must be turned on and the device’s

volume set to the proper level. If the AUX audio is not
loud enough, turn the device’s volume up. If the AUX
audio sounds distorted, turn the device’s volume
down and radio volume up.

Operation Instructions — Universal Serial Bus
(USB)

The USB audio input which allows the user to plug in a
flash drive and utilize the vehicle’s audio system to
amplify the source and play through the vehicle speak-
ers.

Pressing the PLAYER button will change the mode to
USB an iPod or external USB drive is connected.

Pressing the ENTER/BROWSE button while in USB
mode will bring up a list of available categories within
the USB. The categories will consist of: Playlists, Artist,
Album, All Songs, and Genre. Browsing through the
categories will function the same as iPod browse. USB
will not have folder browsing.

If the USB connected does not have any audio files and
the user selects USB as the device to play audio the screen
will display, “No audio files on device” this messaged is
to be displayed for all devices that do not have audio files
when connected and selected.

Security

If this radio is installed in a vehicle that does not have a
matching Vehicle Identification Number (VIN) an Secu-
rity code will need to be entered by the dealer.

CD PLAYER — IF EQUIPPED

The single disc CD player is located in the center console.

350

UNDERSTANDING YOUR INSTRUMENT PANEL

Advertising