Headlights/parking lights/automatic headlights, Instrument panel dimmer, Flash to pass – Dodge 2013 Avenger - User Guide User Manual

Page 21: High beam operation, Front fog lights, Turn signals/lane change assist, Operating your vehicle

Advertising
background image

Headlights/Parking Lights/Automatic Headlights

• Rotate the end of the lever to the first detent for parking lights

, the second detent

for headlights

, and the third detent for AUTO.

• When set to AUTO, the system automatically turns the headlights on or off based on

ambient light levels.

Instrument Panel Dimmer

• Rotate the center portion of the lever to the extreme bottom position to fully dim the

instrument panel lights and prevent the interior lights from illuminating when a door is
opened.

• Rotate the center portion of the lever up to increase the brightness of the instrument

panel lights when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the next detent position to brighten the

odometer and radio controls when the parking lights or headlights are on.

• Rotate the center portion of the lever upward to the last detent to turn on the interior

lighting.

Flash To Pass

• Pull the lever toward you to activate the high beams. The high beams will remain on until

the lever is released.

High Beam Operation

• Push the lever forward to activate the high beams.

NOTE:
For safe driving, turn off the high beams when oncoming traffic is present to prevent
headlight glare and as a courtesy to other motorists.

Front Fog Lights

• Turn on the parking lights or low beam headlights and pull out the end of the lever.

Turn Signals/Lane Change Assist

• Tap the lever up or down once and the turn signal (right or left) will flash three times and

automatically turn off.

OPERATING YOUR VEHICLE

19

Advertising