Dodge 2013 Avenger - User Guide - Manual (Page 78)

Jacking Instructions
1. Remove the scissors jack and lug wrench
from the spare wheel as an assembly.
Turn the jack screw to the left to loosen
the lug wrench, and remove the wrench
from the jack assembly.
NOTE:
The jack handle attaches to the side of the
jack with two attachment points. When the
jack is partially expanded, the tension be-
tween the two attachment points holds the
jack handle in place.
2. Loosen, but do not remove, the wheel
nuts by turning them to the left one turn
while the wheel is still on the ground.
3. There is a front and rear jacking location
on each side of the vehicle.
WHAT TO DO IN EMERGENCIES
76