Dodge 2013 Charger-SRT - User Guide - Manual (Page 108)

Component Fluid, Lubricant, or Genuine Part Capacities
Brake Master Cylinder
We recommend you use MOPAR®
DOT 3 and SAE J1703. If DOT 3 is not
available, then DOT 4 is acceptable.
—
Power Steering Reservoir
We recommend you use MOPAR®
Power Steering Fluid + 4, MOPAR® or
ATF+4® Automatic Transmission Fluid.
—
Fuel Selection –
3.6L Engine
87 Octane
19.1 Gallons (72 Liters)
(Approximate)
Fuel Selection –
5.7L Engine
87 Octane Acceptable. 89 Octane
Recommended.
19.1 Gallons (72 Liters)
(Approximate)
SRT8
Component Fluid, Lubricant, or Genuine Part Capacities
Engine Coolant –
6.4L Engine
We recommend you use MOPAR®
Antifreeze/Coolant Ten Year/
150,000 Mile Formula OAT
(Organic Additive Technology).
15.2 Quarts (14.4 Liters)
Includes heater and
coolant recovery bottle
filled to MAX level.
Engine Oil With Filter –
6.4L Engine
For best performance and maximum
protection under all types of operating
conditions, we recommend full
synthetic engine oils that meet the
American Petroleum Institute (API)
categories of SM or SM/CF. The manu-
facturer recommends the use of a full
synthetic SAE 0W-40 engine oil.
7 Quarts (6.6 Liters)
Engine Oil Filter
We recommend you use MOPAR®
brand Engine Oil Filters.
—
Spark Plugs –
6.4L Engine
We recommend you use MOPAR®
Spark Plugs (Gap 0.043 in [1.1 mm]).
—
Automatic Transmission
We recommend you ONLY use
MOPAR® ATF+4® Automatic Transmis-
sion Fluid. Failure to use ATF+4 fluid
may affect the function or perfor-
mance of your transmission.
—
Axle Rear
We recommend you use MOPAR®
Synthetic Gear Lubricant SAE 75W–90
(API GL-5) (with MOPAR® Friction
Modifier – Hypoid Gear Additive).
—
Power Steering Reservoir
We recommend you use MOPAR®
Power Steering Fluid + 4, MOPAR® or
ATF+4® Automatic Transmission Fluid.
—
Fuel Selection –
6.4L Engine
Premium Unleaded 91 Octane Only
or higher.
19.1 Gallons (72 Liters)
(Approximate)
MAINTAINING YOUR VEHICLE
106