Electronics – Dodge 2013 Charger-SRT - User Guide User Manual

Page 45

Advertising
background image

Setting the Time

• Model 8.4N synchronizes time automatically via GPS, so should not require any time

adjustment. If you do need to set the time manually, follow the instructions below for
Model 8.4.

• For Model 8.4, turn the unit on, then touch the time display at the top of the screen. Touch

Yes.

• If the time is not displayed at the top of the screen, touch More soft-key and then Settings

soft-key. In the Settings screen, touch the Clock soft-key, then check or uncheck this
option.

• Touch + or – next to Set Time Hours and Set Time Minutes to adjust the time.

• If these features are not available, uncheck the Sync with GPS box.

• Touch X to save your settings and exit out of the Clock Setting screen.

Audio Settings

• Touch the Audio soft-key to activate the Audio settings screen to adjust Balance\Fade,

Equalizer, and Speed Adjusted Volume.

• You can return to the Radio screen by touching the X located at the top right.

Balance/Fade

• Touch the Balance/Fade soft-key to Balance audio between the front speakers or fade

the audio between the rear and front speakers.

• Touching the Front, Rear, Left, or Right soft-keys or touch and drag the red Speaker Icon

to adjust the Balance/Fade.

Equalizer

• Touch the Equalizer soft-key to activate the Equalizer screen.

• Touch the + or - soft-keys, or by touching and dragging over the level bar for each of the

equalizer bands. The level value, which spans between ±9, is displayed at the bottom of
each of the Bands.

Speed Adjusted Volume

• Touch the Speed Adjusted Volume soft-key to activate the Speed Adjusted Volume

screen. The Speed Adjusted Volume is adjusted by touching the + and - buttons or by
touching and dragging over the level bar. This alters the automatic adjustment of the
audio volume with variation to vehicle speed.

ELECTRONICS

43

Advertising
This manual is related to the following products: