Rearming of the system, To arm the system, To disarm the system – Dodge 2013 Grand_Caravan - Owner Manual User Manual

Page 20

Advertising
background image

Rearming Of The System

The Vehicle Security Alarm will rearm itself after the 15
additional minutes of headlights and Vehicle Security
Light flashing, if the Vehicle Security Alarm has not been
disabled. If the condition which initiated the alarm is still
present, the Vehicle Security Alarm will ignore that
condition and monitor the remaining doors and ignition.

To Arm The System

Follow these steps to arm the Vehicle Security Alarm:

1. Remove the key from the ignition system (refer to

ЉStarting ProceduresЉ in ЉStarting And OperatingЉ for
further information).

•Make sure the vehicle ignition system is ЉOFFЉ and the
key is physically removed from the ignition.

2. Perform one of the following methods to lock the

vehicle:

• Press LOCK on the interior power door lock switch
with the driver and/or passenger door open.
• Press the LOCK button on the Remote Keyless Entry
(RKE) transmitter.

3. If any doors are open, close them.

To Disarm The System

The Vehicle Security Alarm can be disarmed using any of
the following methods:
• Press the UNLOCK button on the Remote Keyless

Entry (RKE) transmitter.

• Cycle the vehicle ignition system out of the OFF

position. Insert a valid key into the ignition switch and
turn the key to the ON position.

18

THINGS TO KNOW BEFORE STARTING YOUR VEHICLE

Advertising