Rear wiper, High beam operation, Automatic dimming mirrors – Dodge 2013 Durango - User Guide User Manual

Page 33: Operating your vehicle

Advertising
background image

Mist

• Rotate the end of the lever downward when a single wipe is desired.

NOTE:
The mist feature does not activate the washer pump; therefore, no washer fluid will be
sprayed on the windshield. The wash function must be activated in order to spray the
windshield with washer fluid.

Rain Sensing Wipers

• This feature senses moisture on the vehicle's windshield and automatically activates the

wipers for the driver when the switch is in the intermittent position. Rotate the end of the
lever to one of four settings to activate this feature and adjust sensitivity.

• This feature can be activated/deactivated using the Electronic Vehicle Information Center

(EVIC). Refer to the Programmable Features under the Electronics section in this guide.

• Refer to the Owner's Manual on the DVD for further details.

Rear Wiper

Rear Wiper Operation

• Rotate the center portion of the lever forward to the first detent for intermittent operation

and to the second detent for rear wiper operation.

Rear Washer Operation

• Rotate the center portion of the lever past the second detent to activate the rear washer.

High Beam Operation

• Push the lever forward to activate the high beams. Pull the lever toward you for flash to pass.

NOTE:
For safe driving, turn off high beams when oncoming traffic is present to prevent headlight
glare and as a courtesy to other motorists.

AUTOMATIC DIMMING MIRRORS

• The rearview and driver side exterior mirror automatically adjusts for headlight glare

from vehicles behind you.

• You can turn the feature on or off by pressing the button at the base of the rearview

mirror. A light next to the button will illuminate to indicate when the dimming feature is
activated.

OPERATING YOUR VEHICLE

31

Advertising