Uconnect® phone, Phone pairing, Electronics – Dodge 2013 Durango - User Guide User Manual

Page 76

Advertising
background image

Uconnect® Phone

• To determine if your vehicle is equipped with Uconnect® Phone, press the “Uconnect®

Phone” button

located on the radio faceplate. If your vehicle has this feature, you

will hear a voice prompt. If not, you will see a message on the radio “Uconnect phone not
available”.

• The Uconnect® Phone is a voice-activated, hands-free, in-vehicle communications

system with Voice Command Capability (see Voice Command section).

NOTE:
To access the tutorial, press the “Uconnect® Phone” button

. After the BEEP, say

“tutorial.” Press any hard-key/button or touch the display (Touch-Screen radio) to cancel
the “tutorial”.

• The Uconnect® Phone allows you to dial a phone number with your mobile phone using

simple voice commands.

• Refer to your vehicle Owner's Manual on the DVD for further details.

NOTE:
The Uconnect® Phone requires a mobile phone equipped with the Bluetooth® Hands-Free
Profile, Version 1.0 or higher. For Uconnect® Customer Support: U.S. residents - visit
www.UconnectPhone.com or call 1–877–855–8400. Canadian residents - visit www.Drive
Uconnect.com or call, 1-800-465–2001 (English) or 1-800-387-9983 (French). This site will
provide specific instructions based on the type of mobile phone being paired.

Phone Pairing

NOTE:

• Pairing is a one - time initial setup before using the phone.

• Prior to starting the pairing procedure ensure all additional phones within the vehicle

have their Bluetooth® disabled.

• Press the “Phone”

button to begin.

• Wait for the “ready” prompt and BEEP.

• After the BEEP, say ”setup” or “Uconnect device setup”.

• After the BEEP, say “device pairing”.

• After the BEEP, say “pair a device”.

• Follow the audible prompts.

• You will be asked to say a four-digit Per-

sonal Identification Number (PIN), which
you will later need to enter into your mo-
bile phone. You can say any four-digit PIN.
You will not need to remember this PIN
after the initial pairing process.

• You will then be prompted to give the phone pairing a name (each phone paired should

have a unique name).

ELECTRONICS

74

Advertising