Activating rear automatic temperature control, Parksense® rear park assist, Parkview® rear back-up camera – Dodge 2013 Grand_Caravan - User Guide User Manual

Page 32: Operating your vehicle

Advertising
background image

Activating Rear Automatic Temperature Control

• Pressing the REAR LOCK button for the Rear Automatic Temperature Control (ATC)

System from the front lower ATC panel, illuminates a LOCK symbol in the rear display.
The rear temperature and air source are controlled from the front lower ATC panel.

• Rear second row occupants can only adjust the rear ATC control when the REAR LOCK

button is turned off.

• The Rear ATC system is located in the headliner, near the center of the vehicle.

PARKSENSE® REAR PARK ASSIST

• If an object is detected behind the rear bumper while the vehicle is in REVERSE, a warning

will display in the instrument cluster and a tone will sound, (closer the object the faster
the tone) that changes speed depending on the distance of the object from the bumper,
will sound.

• When the Instrument Cluster reads either “Clean Sensor” or “Blinded”, clean off the bumper

sensors to see if the condition is corrected.

PARKVIEW® REAR BACK-UP CAMERA

• You can see an on-screen image of the rear of your vehicle whenever the shift lever is put

into REVERSE. The ParkView® Rear Back-Up Camera image will be displayed on the radio
display screen, located on the center stack of the instrument panel.

• If the radio display screen appears foggy, clean the camera lens located on the liftgate.

WARNING!

Drivers must be careful when backing up; even when using the ParkView® Rear Back-Up
Camera. Always check carefully behind your vehicle, and be sure to check for pedestri-
ans, animals, other vehicles, obstructions, or blind spots before backing up. You must
continue to pay attention while backing up. Failure to do so can result in serious injury or
death.

OPERATING YOUR VEHICLE

30

Advertising