Loose filler cap message – Dodge 2014 Avenger - Owner Manual User Manual

Page 380

Advertising
background image

WARNING!

Never have any smoking materials lit in or near the

vehicle when the gas cap is removed or the tank is
being filled.

Never add fuel when the engine is running. This is

in violation of most state and federal fire regula-
tions and doing so may cause the MIL to turn on.

A fire may result if gasoline is pumped into a

portable container that is inside of a vehicle. You
could be burned. Always place gas containers on
the ground while filling.

NOTE:

• When the fuel nozzle “clicks” or shuts off, the fuel tank

is full.

• Tighten the gas cap until you hear a “clicking” sound.

This is an indication that the gas cap is tightened

properly. The MIL in the instrument cluster may turn
on if the gas cap is not secured properly. Make sure
that the gas cap is tightened each time the vehicle is
refueled.

Loose Filler Cap Message

If the vehicles diagnostic system determines that the fuel
filler cap in loose, improperly installed, or damaged, a
“gASCAP” message will be displayed in the instrument
cluster. Tighten the gas cap until a “clicking” sound is
heard. This is an indication that the gas cap is properly
tightened. Press the trip odometer reset button to turn off
the message. If the problem persists, the message will
appear the next time the vehicle is started. This might
indicate a damaged cap. If the problem is detected twice
in a row, the system will turn on the MIL. Resolving the
problem will turn the MIL off.

378

STARTING AND OPERATING

Advertising