Cleaning center console cupholders, Removal, Cleaning – Dodge 2014 Avenger - Owner Manual User Manual

Page 464: Installation, Fuses

Advertising
background image

Replace the belts if they appear frayed or worn or if the
buckles do not work properly.

Cleaning Center Console Cupholders

Removal

Grab the rubber portion of the cupholder and lift up-
ward.

Cleaning

Soak the rubber cupholder liner in a mixture of medium
hot tap water and one teaspoon of mild liquid dish soap.
Let soak for approximately one hour. After one hour pull
the liner from the water and dip it back into the water
about six times. This will loosen any remaining debris.
Rinse the liner thoroughly under warm running water.
Shake the excess water from the liner and dry the outer
surfaces with a clean soft cloth.

Installation

Align the liner in the cupholder and press down firmly.

FUSES

WARNING!

When replacing a blown fuse, always use an appro-

priate replacement fuse with the same amp rating as
the original fuse. Never replace a fuse with another
fuse of higher amp rating. Never replace a blown fuse
with metal wires or any other material. Failure to use
proper fuses may result in serious personal injury,
fire and/or property damage.

Before replacing a fuse, make sure that the ignition

is off and that all the other services are switched off
and/or disengaged.

(Continued)

462

MAINTAINING YOUR VEHICLE

Advertising