Changing fcw status – Dodge 2014 Charger - Owner Manual User Manual

Page 270

Advertising
background image

Changing FCW Status

The FCW feature can be set to far, set to near or turned off
using the Uconnect® System, refer to “Uconnect® Set-
tings” in “Understanding Your Instrument Panel” for
further information. The FCW Status Off, Near or Far will
be displayed in the Uconnect® display.

The default status of FCW is the “Far” setting, this allows
the system to warn you of a possible collision with the
vehicle in front of you when you are farther away. This
gives you the most reaction time.

Changing the FCW status to the “Near” setting, allows
the system to warn you of a possible collision with the
vehicle in front of you when you are much closer. This
setting provides less reaction time than the “Far” setting,
which allows for a more dynamic driving experience.

Changing the FCW status to “Off” prevents the system
from warning you of a possible collision with the vehicle
in front of you.

NOTE:

• In the “Off” setting FCW OFF will be displayed on the

Uconnect® display.

• The system will retain the last setting selected by the

driver after ignition shut down.

• FCW will not react to irrelevant objects such as over-

head objects, ground reflections, objects not in the path
of the car, stationary objects that are far away, oncom-
ing traffic, or leading vehicles with the same or higher
rate of speed.

• If the FCW becomes disabled then a warning will

display on the EVIC screen.

268

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising