Enabling and disabling parksense, Rear park assist audible alerts – Dodge 2014 Charger - Owner Manual User Manual

Page 276

Advertising
background image

Enabling And Disabling ParkSense®

ParkSense® can be enabled and disabled using the
Uconnect® System. The available choices are: Off, Sound
Only, or Sound and Display. Refer to “Uconnect® Set-
tings” in “Understanding Your Instrument Panel” for
further information.

When the ParkSense® soft-key is pressed to disable the
system, the EVIC will display the “PARK ASSIST SYS-
TEM OFF” message for approximately five seconds.
Refer to “Electronic Vehicle Information Center (EVIC)”
in “Understanding Your Instrument Panel” for further
information. When the shift lever is moved to REVERSE
and the system is disabled, the EVIC will display the
“PARK ASSIST SYSTEM OFF” message for as long as the
vehicle is in REVERSE.

Rear Park Assist Audible Alerts

ParkSense® will turn off the Rear Park Assist audible
alert (chime) after approximately 3 seconds when an
obstacle has been detected, the vehicle is stationary, and
brake pedal is applied.

Adjustable Chime Volume Settings

Chime volume settings can be selected from the
Uconnect® System.

The chime volume settings include LOW, MEDIUM, and
HIGH. The factory default volume setting is MEDIUM.

ParkSense® will retain its last known configuration state
through ignition cycles.

274

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

Advertising