Illuminated vanity mirrors — if equipped, Sun visor “slide-on rod” feature — if equipped, Blind spot monitoring (bsm) — if equipped – Dodge 2014 Dart - Owner Manual User Manual

Page 125: Blind spot monitoring (bsm) — if, Equipped

Advertising
background image

Illuminated Vanity Mirrors — If Equipped

An illuminated vanity mirror is on each sun visor. To use
the mirror, rotate the sun visor downward and swing the
mirror cover upward. The light will turn on automati-
cally. Closing the mirror cover will turn off the light.

Sun Visor “Slide-On Rod” Feature — If Equipped

This feature allows for additional flexibility in position-
ing the visor to block out the sun.

1. Fold down the sun visor.

2. Unclip the visor from the center clip.

3. Pull the sun visor toward the inside rearview mirror to

extend it.

BLIND SPOT MONITORING (BSM) — IF
EQUIPPED

The Blind Spot Monitoring (BSM) system uses two radar-
based sensors, located inside the rear bumper fascia, to
detect highway licensable vehicles (automobiles, trucks,
motorcycles, etc.) that enter the blind spot zones from the
rear/front/side of the vehicle.

Illuminated Vanity Mirror

3

UNDERSTANDING THE FEATURES OF YOUR VEHICLE

123

Advertising