Esc activation/malfunction indicator light – Dodge 2014 Dart - Owner Manual User Manual

Page 458

Advertising
background image

WARNING!

When in ؆Partial Off؆ mode, the TCS functionality

of ESC, (except for the limited slip feature de-
scribed in the TCS section), has been disabled and
the

؆ESC Off Indicator Light؆ will be illuminated.

When in

؆Partial Off؆ mode, the engine power

reduction feature of TCS is disabled, and the
enhanced vehicle stability offered by the ESC sys-
tem is reduced.

Trailer Sway Control (TSC) is disabled when the

ESC system is in the

؆Partial Off؆ mode.

NOTE:

When driving with snow chains, or when starting

off in deep snow, sand, or gravel, it may be desirable to
allow more wheel spin when starting off in snow, mud,
sand, gravel, or when using tire chains. This can be
accomplished by momentarily pressing the “ESC off”
button to enter partial mode “Partial Off” mode. Once the

situation requiring “Partial Off” mode is overcome, turn
ESC back on by momentarily pressing the “ESC Off”
button. This may be done while the vehicle is in motion

ESC Activation/Malfunction Indicator Light

The “ESC Activation/Malfunction Indicator
Light” in the instrument cluster will come on
when the ignition switch is turned to the ON
position. It should go out with the engine

running. The “ESC Activation/Malfunction Indicator
Light” will flash to indicate the system is actively cor-
recting an undesirable vehicle condition. This includes
Yaw control, traction control, and trailer sway control. If
the lamp remains solid under normal driving conditions,
your vehicle should be serviced at an authorized dealer.

The “ESC Activation/Malfunction Indicator Light” starts
to flash as soon as the tires lose traction and the ESC
system becomes active.

456

STARTING AND OPERATING

Advertising