Autostick operation – Dodge 2015 Charger - Police Supplement User Manual

Page 45

Advertising
background image

AutoStick Operation

When the shift lever is in the DRIVE position, the

transmission will operate automatically, shifting between

the five available gears. To activate AutoStick mode,

press and release the AUTOSTICK ON/OFF switch (on

the end of the shift lever) at any time while in the DRIVE

position. When AutoStick is active, the current transmis-

sion gear is displayed in the instrument cluster.
In AutoStick mode, pressing the AUTOSTICK up (+) or

down (-) switch allows you to select a higher or lower

gear. Pressing the bottom of the switch (-) triggers a

downshift (unless it would cause engine overspeeding),

and pressing the top of the switch (+) triggers an upshift

(unless it would cause engine lugging). The transmission

will remain in the current gear until another upshift or

downshift is chosen, except as described below.

• The transmission will automatically downshift as the

vehicle slows (to prevent engine lugging) and will

display the current gear.

• The transmission will automatically downshift to first

gear when coming to a stop. After a stop, the driver

should manually upshift (+) the transmission as the

vehicle is accelerated.

AutoStick Switch

5

STARTING AND OPERATING 43

Advertising