Preparations for jacking – Dodge 2015 Charger - Police Supplement User Manual

Page 53

Advertising
background image

WARNING!

A loose tire or jack thrown forward in a collision or

hard stop could endanger the occupants of the
vehicle.

Always stow the jack parts and the spare tire in the

places provided. Have the deflated (flat) tire re-
paired or replaced immediately.

Preparations For Jacking

1. Park the vehicle on a firm, level surface as far from the

edge of the roadway as possible. Avoid icy or slippery

areas.

WARNING!

Do not attempt to change a tire on the side of the
vehicle close to moving traffic, pull far enough off

(Continued)

WARNING!

(Continued)

the road to avoid the danger of being hit when
operating the jack or changing the wheel.

2. Turn on the hazard warning flasher.
3. Set the parking brake.
4. Place the shift lever into PARK.
5. Turn OFF the ignition.
6. Block the front and rear of the wheel diagonally

opposite of the jacking position. For example, if chang-

ing the right front tire, block the left rear wheel.

NOTE:

Passengers should not remain in the vehicle

when the vehicle is being jacked.

6

WHAT TO DO IN EMERGENCIES 51

Advertising