Casio FC-200V - Manual (Page 40)

E-38
• The “M” indicator appears in the upper left of the display
when there is any value other than zero stored in
independent memory.
• Independent memory contents are maintained even if you
press the A key, change the calculation mode, or turn
off the calculator.
A Calculation Examples Using Independent
Memory
• If the “M” indicator is on the display, perform the procedure
under “Clearing Independent Memory” before performing
this example.
Example: 23 + 9 = 32 23+9 m
53 – 6 = 47 53-6 m
–) 45
× 2 = 90 45*2 1m(M–)
99
÷ 3 = 33
99/3 m
(Total) 22 Sm(M)E
A Clearing Independent Memory
1. 0
2. 1t(STO)
3. “M:”( fc), then E.
4. E(Yes)
• This clears independent memory and causes the “M”
indicator to disappear from the display.
k Variables (A, B, C, D, X, Y)
A Variable Overview
• You can assign a specific value or a calculation result to
a variable.
Example: To assign the result of 3 + 5 to variable A.
1. 3+5
2. 1t(STO)
3. “A:”( fc), then E.
4. E(Yes)