Casio FC-200V - Manual (Page 67)

E-65
*
2
• You must input two digits for the month and day. This
means you should include a leading zero for values
from 1 through 9 (01, 02, 03... etc.).
• You can specify either month, day, year (MDY) or day,
month, year (DMY) as the date input format. See the
“Date Input” setting under “Configuring Settings” (page
E-16).
Note
• After specifying the 1 Days in Year (Date Mode) in the
Day Calculation Mode, you can calculate any one of the
following three values by inputting values for the other
two: 2 Starting Date (d1), 3 Ending Date (d2), and 4
Number of Days (Dys).
A Basic DAYS Mode Procedure
Example 1: To calculate the number of days between two
dates
1. Input the required values from the Setting Values table
(page E-64).
• For this example, use
fc to select 1 “Set:”,
and then press E.
• Press 2 to select “365”.
• Use
fc to select 2
“d1”, input 11052004, and
then press E.
• Use fc to select 3 “d2”, input 04272005, and then
press E.
2. Select the value you want to calculate.
• For this example, use
fc to select “Dys”.
3. Press l to perform the
calculation.