Global position system locator, Maintenance, Maintenance • maintenance of your radar detector – Cobra Electronics XRS 9965/70G User Manual

Page 25: Intelliview, Intelliview pro

Advertising
background image

English

44

Global Position System Locator

GPS Locator

Intro

Operation

Customer

Assistance

Warranty

Notice

Main Icons

Secondary Icons

Nothing Comes Close to a Cobra

®

45

Maintenance

Customer Information

Intro

Operation

Customer

Assistance

Warranty

Notice

Main Icons

Secondary Icons

Maintenance

Maintenance of Your Radar Detector

Your detector is designed and built to give you years of trouble-free performance

without the need for service. No routine

Maintenance is required.

If you have added the GPS Locator unit to your detector, you can

update the database of Photo Enforced locations. Go to Cobra’s website

(www.cobra.com) and follow the online instructions.
If your unit does not appear to be operating properly, please follow these

troubleshooting steps:

n

Make sure the power cord is properly connected.

n

Make sure the socket of your vehicle’s cigarette lighter

is clean and free of corrosion.

n

Make sure the power cord’s cigarette lighter adapter

is firmly seated in your cigarette lighter.

n

Check the power cord fuse. (Unscrew the ribbed end cap of

the cigarette lighter adapter and examine the fuse. If required,

replace it with a 2-amp fuse only.)

IntelliView

If a radar or laser signal is detected while a Location-Based Alert (other than

a Speed Trap) is active, the proper alert icon will appear in the lower right

corner of the display screen so that you can see both alerts at once.

IntelliView – Ka Band Alert While

Photo Enforcement Alert is Active

IntelliView Pro – Ka Band Alert

While Speed Display Alert is Active

Zone 1

IntelliView Pro

During radar, radar detector-detector or laser warnings your vehicle’s speed

will also be shown in the lower left corner of the display. The speed value

will be updated every second until the alert is over.

Advertising