Acronis Backup for Windows Server Essentials - User Guide - Manual (Page 325)

325 Copyright © Acronis International GmbH, 2002-2014
2. Edit the value of the <Path> tag , which contains information about data to back up; for example,
replace "C:" with "D:".
Replacing a directly specified item with a selection template
Inside the <plan><options><specific><inclusion_rules> section:
1. Add the <rules_type> tag with "disks" or "files" value, depending on the type of the
template you need.
2. Add the <rules> tag.
3. Inside the <rules> tag, add the <rule> with the required template. The template must
correspond to the directly specified item. For example, if the specified item has the "disks"
value, you can use the [SYSTEM], [BOOT] and [Fixed Volumes] templates; but you cannot
use the [All Files] or [All Profiles Folder] templates. For more information about
templates, see "Selection rules for volumes" (p. 353) and "Selection rules for files and folders" (p.
352).
4. To add another template, repeat the step 3.
Example
The following example illustrates how to replace a directly specified item with selection templates.
The original section:
<specific>
<backup_type>
disks
</backup_type>
<disk_level_options />
<file_level_options />
<inclusion_rules />
<specific>
The section after applying the selection templates:
<specific>
<backup_type>
disks
</backup_type>
<disk_level_options />
<file_level_options />
<inclusion_rules>
<rules_type>
disks
</rules_type>
<rules>
<rule>
[BOOT]
</rule>
<rule>
[SYSTEM]
</rule>
</rules>
</inclusion_rules>
<specific>