Acronis Access Advanced - Installation Guide - Manual (Page 85)

85 Copyright © Acronis International GmbH, 2002-2014
10. Once installation has completed, a summary of the components installed is shown. Click Exit to
continue.
11. At this point in the upgrade process, all necessary software has been installed, but you must now
configure the network interfaces, ports, and certificates that will be used.
IMPORTANT NOTE: If you do not proceed with this configuration step, your mobilEcho server will not
be functional. This step is mandatory.
When exiting the installer, you will be prompted to run the Acronis Access Configuration Utility. Click
OK to continue.
If you accidently skip this step or need to change your network interfaces, ports, or certificates in the
future. You can manually run the configuration utility at any time.
On upgraded mobilEcho servers, the utility’s default location is:
C:\Program Files (x86)\Group Logic\Configuration Utility\AcronisAccessConfiguration.exe
12. Within the Configuration Utility, the Gateway Server tab is used to configure your Acronis Access
Gateway Server’s network address, port, and certificate. The Acronis Access Gateway Server is
the core mobilEcho service that your mobilEcho clients connect to and that gives access to your
file servers, NAS, and SharePoint servers. This service was called the mobilEcho File Access Server
prior to Acronis Access.