Setting oven controls – FRIGIDAIRE FGEF308TNF User Manual

Page 19

Advertising
background image

19

SETTING OVEN CONTROLS

Air circulation during Convection Bake

Figure 1

Oven Rack Positions

Figure 2

Benefi ts of Convection Bake:
— Multiple rack baking.
— Some foods cook faster, saving time and energy.
— No special pans or bakeware needed.

SETTING CONVECTION BAKE

This mode of cooking enables you to obtain the best

culinary results when baking with multiple pans and racks.

Multiple rack baking may slightly increase cook time for

some foods but the overall result is time saved. Some food

may cook faster and more evenly with Convection Bake.

Convection baking uses the three elements and a fan to

circulate the oven’s heat evenly and continuously within

the oven. The oven can be programmed for Convection

baking at any temperature between 170°F to 550°F with a

default temperature of 350°F.
Convection Baking Tips:

Always preheat your oven before using the Convection

Bake mode.

During preheat, the 3 elements and the convection fan

are used in cycle to quickly heat the oven.

If your recipe cooking temperature has already been

converted for convection baking there is no need to

reduce your oven temperature. If your recipe has not

had the temperature converted for convection baking

you can easily reduce using the Convection Convert

feature. Please see Convection Convert section on next

page for further instruction on temperature conversion.

Use tested recipes with times adjusted for convection

baking when using this mode. Time reductions will

vary depending on the amount and type of food to be

cooked.

When using Convection Bake with a single rack, place

oven rack in position 2. If cooking on multiple racks,

place the oven racks in positions 1 & 3.

Most bakeries (except cakes) should be baked on pans

with no sides or very low sides to allow heated air to

circulate around the food.

Food baked on pans with a dark fi nish will cook faster.

NOTE

Pressing CLEAR will stop the feature at any time.

NOTE

The convection fan will start AS SOON AS the oven is

set for Convection Bake. The display will show an icon

of rotating fan within a square. This rotating fan icon

indicates when the Convection Fan is operating. The

Bake, Broil and Convection elements will also cycle for

a better heat distribution.

To set the oven for Convection Bake and

temperature to 375°F

1. Arrange interior oven racks.

2. Press UPPER OVEN or LOWER OVEN to select oven.

3. Press CONVECT. "CONVECT" and "BAKE" will fl ash

and "350" will appear in the display. If a Convection

Bake of 350°F is needed, press START.

4. Press 3 7 5. "CONVECT" and "BAKE" will keep

fl ashing and “375°” will appear in the display.

5. Press START. The actual oven temperature and the

fan icon will be displayed. A beep will sound once the

oven temperature reaches 375°F and the display will

show "375°", "CONVECT", "BAKE" and the fan icon.

6. Place food in the oven.

Advertising