Canon 4.1 - Manual (Page 8)

8
Scanning Procedures
Follow these procedures to use Plug-in Module CS-U.
S T E P 2
S T E P 1
Is the scanner attached?
Prepare for Scanning ➜ p. 13
• Position the Original
• Preview
• Select the Output Device
• Set the Resolution and Magnification
• Set the Scan Mode
p. 16
p. 17
p. 18
p. 19
p. 21
• Set the Scan Area
• Zoom
• Scan
• Save Scanned Images
• Scan Film
If the current brightness
and color pose no problem,
there is no need to adjust
these settings.
Scan ➜ p. 29
Adjust and Edit Scanned Images
➜ p. 39
Verify the Image before Scanning
(Browser Window) ➜ p. 23
Are the Brightness and Color Satisfactory?
p. 30
p. 31
p. 33
p. 34
p. 35
• Histogram
• Tone Curve
• Brightness and Contrast
• Color Balance
• Gamma Value
• Threshold Value
• Auto Tone (ColorSync TM )
• Unsharp Mask
• Descreen
• High-Speed Scan Mode
p. 41
p. 44
p. 47
p. 49
p. 50
p. 52
p. 53
p. 54
p. 55
p. 56
Is Plug-in Module CS-U installed?
S T E P 3
Refer to the scanner's
Quick Start Guide to
attach it.
Refer to the scanner's
Quick Start Guide to
install it.