AAXA Technologies M1 Ultimate - Manual (Page 10)

To connect an A/V cable insert the 3.5mm portion into the A/V
port of the projector. Then click on either the “A/V input” icon
in the main menu, or press “source” on the remote control and
select “A/V input”. A blue screen will appear and the Projector
will be ready to accept an A/V signal.
Possible A/V sources: Composite (included), Iphone / Ipod (optional), Zune
(optional), Playstation Portable (optional), and others. Please check
www.aaxatech.com or your AAXA dealer for optional A/V cables.
USB Data Access and Transfers
The M1 projector includes 1GB of onboard memory for
storage and can function as a USB Host device. For
instructions on how to access the onboard memory and
connect USB devices to the projector, please refer to the
USB On-The-Go & Data Transfer instructions on page 13.
General Operation
9