AAXA Technologies M1 Ultimate - Manual (Page 14)

USB On-The-Go
The M1 Ultimate has the ability to
read data from a USB storage device
(such as memory sticks, cell phones
USB hard drives, etc). This allows the
user to view the data stored on the
USB storage device through the
onboard media player.
To access data on your USB storage
device, plug your USB device into
the USB slot on the back of the M1.
Once the connection is made, select USB Mode from the main menu and the
USB Host icon in the USB menu data will be available. After selecting USB Host
you should now be able to access the data on the USB device through the
onboard media player. If the data does not appear, check the formating of the
file system on the USB device and also confirm that the device is compatible
with a USB On-The-Go host device.
USB Data Transfer
The M1 projector includes 1GB of onboard memory for
storage. To access this memory connect a USB cable to
the back of the projector and a computer. Then select
USB Mode in the main menu and USB Device in the
USB menu.
The computer should auto-detect the connected projector and its onboard
memory as a “flash drive.” Double-click the drive to open the drive contents
and manipulate as a standard USB flash drive.
NOTE: If the computer fails to detect the flash drive, check to make sure the
projector is in USB-Data mode and do a search for new devices. If still unable to
find the drive, please consult with your operating system’s owner manual
regarding detecting flash drives.
USB On-The-Go & Data Transfer
13