Dell Latitude D630C (Late 2008) - Manual (Page 2)

2 Make a note of the large number on the label. This number is the
management mode number that is required in step 6.
3 Replace the battery.
4 Ensure that the network cable and any USB mass storage devices, such as
hard drives or flash keys, are disconnected.
5 Turn on your computer.
An initialization screen displays and the computer prompts you to select
the appropriate configuration.
6 Type the mode number from the label in the battery bay (noted in step 2).
The computer prompts you to confirm that you want to continue with the
selection.
NOTICE:
You must enter the correct management mode; otherwise, your computer
may not function properly and the new system board may have to be replaced.
7 If the management mode number that you entered is correct, select Y.
After the initialization is complete, ensure that the computer shuts down.
If the computer does not shut down automatically, you may have to turn it
off manually.
8 Remove the battery and the AC adapter.
9 Replace the battery and the AC adapter.
10 Reconnect your network cable and devices
11 Restart your computer.
____________________
Information in this document is subject to change without notice.
© 2007 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly
forbidden.
Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming
the marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and
trade names other than its own.