Dell PowerEdge M600 - Manual (Page 2)

Blade Messages
Table 2 updates the following blade messages listed in your Hardware Owner’s
Manual:
• “This system does not support processors greater than 95W.” has been
revised.
• “This system only supports AMD™ Opteron™ 2000 series processors.
System halted. (PowerEdge M605 only)” is no longer applicable and has
been deleted from the BIOS.
Blade - Model 10G-MAG
(Dell PowerEdge M605) 12VDC, 33.33A
Blade - Model 10G-TOM
(Dell PowerEdge M600) 12VDC, 35A
Table 2. Blade Messages
Message Causes Corrective Actions
This system does
not support
Opteron SE
processors. Unsupported processor(s)
installed. Replace the processor(s)
with a supported version.
See “Processors”
on page 113.
Table 1. Power Specifications
Hardware Rating
YN970ap0.fm Page 10 Wednesday, November 28, 2007 2:09 PM