Dell PowerEdge Rack Enclosure 2410 - Manual (Page 2)

Installing the Front Stabilizer Feet
1 Open the front door.
2 Reach into the rack and pull up firmly on each stabilizer to detach them
from the frame.
3 Remove the plastic fasteners from the stabilizer feet.
4 Position each front stabilizer foot against the base of the rack frame and align
its holes with the corresponding holes in the frame.
5 Use the provided bolts, washers, and cage nuts to secure each foot to the rack
as shown in Figure 1-1.
Figure 1-1. Installing the Front Stabilizer Feet
1 front stabilizer foot (2)
1