Canon RS-CL07 User Manual

Page 19

Advertising
background image



4

Attach the anti-fall wires

1 Loosen the left and right adjusting feet of

the projector.

2 Pass one end of the anti-fall wire (longer

wire for RS-CL10) into the square hole (A)

on the Base bracket, and then fasten the

other end to the right adjusting foot (B).

3 Pass one end of the anti-fall wire (shorter

wire for RS-CL10) into the square hole

(C), and then fasten the other end to the

left adjusting foot (D).

4 Tighten the left and right adjusting feet to

secure the anti-fall wires.

● Be sure to attach both anti-fall wires.

5

Pull cables out of the cable hole in

the ceiling

6

Attach the Joint fitting to the

Ceiling-mount bracket

Secure the Ceiling-mount bracket using the

four M5 screws removed during preparation.

B

D

A

C

WUX10 MarkII/SX7 MarkII/SX60/X700

SX80 MarkII/SX800

C

D

A

B

Direction to the

screen

Advertising
This manual is related to the following products: