Adjust the projection angle, Adjust the horizontal projection angle, Adjust the vertical projection angle – Canon RS-CL07 User Manual

Page 24: Adjust the screen inclination

Advertising
background image



Adjust the Projection Angle

Turn on the projector, project an image, and then adjust the projection angle and screen slant angle.

● After completion of adjustment, tighten the screws and check that every fitting is secured firmly.
● Be sure to hold the projector from falling until the Ceiling-mount bracket and Base bracket are secured

firmly.

Adjust the horizontal projection angle

1 Loosen two wing screws (A). Move the

projector horizontally to adjust the horizontal

projection angle.

2 When the projector is correctly positioned,

tighten the wing screw.

Adjust the vertical projection angle

1 First loosen four screws (B) and then

loosen two wing screws (C). Move the

projector vertically to adjust the vertical

projection angle.

2 When the projector is correctly positioned,

first tighten the wing screws (C) and next

tighten the four screws (B).

Adjust the screen inclination

1 Loosen four screws (D), and then adjust

the slant angle of the projector.

2 When the projector is correctly positioned,

tighten the four screws (D).

Adjust the horizontal projection angle.

Adjust the vertical projection angle.

Adjust the screen slant angle.

20°

10°

A

B

C

D

Advertising
This manual is related to the following products: