Dell PowerVault NX3600 User Manual
Page 24
NOTE: The Security Alert window is displayed after you install the PowerVault NAS cluster solution, or after
upgrading the system. Clicking Yes enables the current session. Clicking View Certificate, as explained in the
following step, enables all future sessions.
The Security Alert window is displayed.
2.
Click View Certificate.
3.
Click Install Certificate.
The Certificate Import Wizard is displayed.
4.
Click Next.
The Certificate Store screen is displayed.
5.
Verify that Automatically select the certificate store based on the type of certificate is selected and click Next.
The Completing the Certificate Import Wizard screen is displayed.
6.
Click Finish.
A message prompts you that the certificate is imported successfully.
7.
Click OK.
The certificate window is displayed.
8.
In the Certificate window, click OK.
9.
Access the NAS Manager.
NOTE: This window is displayed only if the license has not been installed.
The PowerVault License file window is displayed.
10. Browse to the License file and click Install.
11. Type the username and password and click Log in.
NOTE: Use admin as the username. The default password is Stor@ge!. You have the option of changing the
password later.
NOTE: If the Start Configuration page does not open automatically, click System Management → Maintenance
Start Configuration Wizard .
24