Clarion VRX935VD - Manual (Page 22)

26
VRX935VD
English
Owner’
s manual
Manual tuning
There are 2 ways available: Quick tuning and
step tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
∗
If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the [ a ] or [ d ] button for 1
second or longer to tune in a station.
● Step tuning:
Press the [ a ] or [ d ] button to manually
tune in a station.
Recalling a preset station
A total of 24 preset positions (6-FM1, 6-FM2, 6-
FM3, 6-AM) exists to store individual radio sta-
tions in memory. Pressing the corresponding
[DIRECT] button recalls the stored radio fre-
quency automatically.
There are 2 ways available to recall the preset
station.
● Using the [DIRECT] buton.
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
2. Press the corresponding [DIRECT] button to
recall the stored station.
∗
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store that station
into preset memory.
● Using the [DIRECT] key.
1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.
2. Touch the corresponding [DIRECT] key to re-
call the stored station.
∗
You can select the desired band to touch the
[BAND] key.
3. Touch the [RTN] key or press the [LIST] but-
ton to return to the previous mode.
Seek tuning
1. Press the [BAND] button and select the de-
sired band. (FM or AM)
2. Tune in to a station.
∗
If “MANU” is lit in the display press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
3. Press the [ a ] or [ d ] button to automatically
seek a station.
When the [ d ] button is pressed, the station
is sought in the direction of higher frequen-
cies; when the [
a ] button is pressed, the
station is sought in the direction of lower fre-
quencies.
∗
When the panel is open, the same operation
is also available by using the [
a ] and [ d ]
button in the panel.
Selecting stations with the KEY PAD
∗
This function displays the KEY PAD on the screen
enabling you to tune in through auto store, preset
scan or by entering a frequency.
Press the [KEY PAD] button to display the KEY PAD.
Radio Operations
● Tuning in by selecting a frequency
1. Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
● To use auto store,
touch the [AS] key for about 2 seconds.
● To perform a preset scan,
touch the [PS] key.
● To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF]
key.