Clarion VRX935VD - Manual (Page 46)

50
VRX935VD
English
Owner’
s manual
Seek tuning
1. Press the [BAND] button and select the de-
sired TV band (TV1 or TV2).
∗
If “MANU” is lit in the display, press and hold
the [BAND] button for 1 second or longer.
“MANU” in the display goes off and seek tun-
ing is now available.
2. Press the [ d ] or [ a ] button to automatically
seek a station. Press the [ d ] button to auto-
matically tune up the frequency band to the
next available TV station; press the [
a ] but-
ton to automatically tune down.
∗
When the panel is open, the same operation
is also available by using the [
a ] or [ d ] but-
ton in the panel.
Selecting stations with the KEY
PAD
∗
This function displays the KEY PAD on the screen
enabling you to tune in through auto store, preset
scan or by entering a frequency.
Press the [KEY PAD] button to display the KEY
PAD.
TV Operations
Manual tuning
There are 2 ways available: Quick tuning and
step tuning. When you are in the step tuning
mode, the frequency changes one step at a
time. In quick tuning mode, you can quickly tune
the desired frequency.
1. Press the [BAND] button and select the de-
sired band. (TV1 or TV2)
∗
If “MANU” is not lit in the display, press and
hold the [BAND] button for 1 second or longer.
“MANU” appears in the display and manual
tuning is now available.
2. Tune into a station.
● Quick tuning:
Press and hold the [ d ] or [ a ] button for 1 sec-
ond or longer to tune in a station.
● Step tuning:
Press the [ d ] or [ a button to manually tune in
a station.
Note:
• Manual tuning is cancelled if you do not operate the
unit for 7 seconds longer. (
∗
Only when connecting
the TTX7503Z or TTX7504Z with this unit)
Recalling a preset station
A total of 12 TV stations can be stored (6-TV1
and 6-TV2). This allows you to select your favor-
ite TV stations and store them in memory for
later recall.
There are 2 ways available to recall the preset
station.
● Using the [DIRECT] buton.
1. Press the [BAND] button and select the de-
sired TV band. (TV1 or TV2)
2. To recall a stored TV station, press the de-
sired [DIRECT] button to select that station.
∗
Press and hold one of the [DIRECT] buttons
for 2 seconds or longer to store the current
station into the preset memory.
● Using the [DIRECT] key.
1. Press the [LIST] button or touch the screen
when the STANDARD screen is displayed,
then touch the [P.CH SELECT] key.
2. Touch the corresponding [DIRECT] key to re-
call the stored station.
∗
You can select the desired band to touch the
[BAND] key.
3. Touch the [RTN] key or press the [LIST] but-
ton to return to the previous mode.
● Tuning in by selecting a frequency
1. Touch the [SRCH] key to switch the KEY
PAD.
2. Touch the [0]~[9] key corresponding with the
frequency you desired. When you touch the
wrong number ([0]~[9] key), you can cancel
that to touch the [DEL] key.
3. Touch the [ENT] key. The radio station you
required would be tuned.
● To use auto store,
touch the [AS] key for about 2 seconds.
● To perform a preset scan,
touch the [PS] key.
● To cancel the KEY PAD display,
press the [KEY PAD] button or touch the [OFF]
key.