CITIZEN CT-S310II - Manual (Page 21)

— 18 —
1. Turn off the power.
2. Connect the AC power cord to the AC inlet, and insert the plug into an electric outlet.
3. SETUP
3.1 Connecting the AC Power Cord
CAUTION
„ Use an AC power source that does not also supply power to equipment that
generates electromagnetic noise.
„ Pulling on the AC power cord may damage it, cause a fire, electric shock, or break a
wire.
„ Make sure that the AC power cord is fully inserted so it does not pull out during use.
„ If a lightning storm is approaching, unplug the AC power cord from the electric outlet.
A lightning strike may cause a fire or electric shock.
„ Keep the AC power cord away from heat generating appliances. The insulation on the
AC power cord may melt and cause a fire or electric shock.
„ If the printer is not going to be used for a long time, unplug the AC power cord from
the electric outlet.
„ Place the AC power cord so that people do not trip on it.
AC power cord
AC inlet