Dell UPS 1920T User Manual
Page 8
Advertising
6
|
Installation
3
Install the battery connector cover under the EBM cable to provide strain relief.
Rotate the battery connector cover on its side and position under the EBM cable.
Connecting the EBM Cable
4
Plug the EBM cable into the UPS battery connector.
5
Secure the battery connector cover to the UPS rear panel using the screws removed in Step 2.
CAUTION:
Follow the instructions in the UPS Getting Started document or the Dell Line-Interactive Tower
UPS 500W, 1000W, and 1920/1500W User's Guide for instructions on installing the UPS.
Advertising