Dell PowerEdge Rack Enclosure 4220 - Manual (Page 27)

Installation Guide
25
Installing the Front Stabilizer Feet
1 Open the front door.
2 Reach into the rack and pull up firmly on each stabilizer to detach them
from the frame.
3 Remove the plastic fasteners attached to the stabilizer feet.
4 Position each front stabilizer foot against the base of the rack frame and
align its holes with the corresponding holes in the frame.
5 Use the provided bolts, washers, and cage nuts to secure each foot to the
rack as shown in Figure 1-13.
Figure 1-13. Installing the Front Stabilizer Feet
1 front stabilizer foot (2)
1