Dell PowerEdge SC 420 - Manual (Page 3)

www
.dell.com | support.dell.com
Removing the Power Supply
Figure 1 replaces Figure 6-2 in "Installing System Options" in the Installation and Troubleshooting
Guide. Only two screws are used to secure the power supply.
Figure 1. Removing the Power Supply and Cooling Fan
____________________
Information in this document is subject to change without notice.
© 2005 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and PowerEdge are trademarks of Dell Inc.; Intel and Celeron are registered
trademarks of Intel Corporation; Red Hat is a registered trademark of Red Hat, Inc.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the marks and names
or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade names other than its own.
release levers (2)
cooling fan
power supply
power supply release button
screws (2)