Dell PowerEdge M710 - Manual (Page 12)

12
Information Update
Indicator Type Pattern Description
Fibre Channel
port status
indicator Off No signal carrier
Amber on Signal present but not online
Green on Online, but no activity
Green
blinking slowly Online but segmented
Green
blinking quickly Internal loopback
Green flickering I/O activity on port
Amber
blinking slowly Port disabled
Amber
blinking rapidly Error or fault with port
Fibre Channel
port speed
indicator Off 2 Gb link established
Green on 4 Gb link established
Amber on 8 Gb link established
Module status
indicator Off Module is off or enclosure power is off.
Green on All ports are ready for use.
Amber on Module is booting being reset, or ports are offline.
Green/amber
blinking Diagnostic message is in error log, or
environmental range is exceeded.
Module power
indicator Off Power to the module is off.
Green Module has power.
Status/
identification
indicator Blue on Primary module in a stack, if applicable
Blue off Secondary module in a stack
Amber flashing Fault condition in module