Replacing the display panel cable – Dell Inspiron 1440 (Mid 2009) User Manual
Page 22
Advertising
2.
Remove the display assembly (see
).
3.
).
4.
Remove the display panel (see
5.
Turn over the display panel and place it on a clean surface.
6.
Lift the conductive tape that secures the display panel cable to the display board connector and disconnect the display panel cable.
Replacing the Display Panel Cable
1.
Connect the display panel cable to the display board connector and secure it with the conductive tape.
2.
Replace the display panel (see
).
3.
Replace the display bezel (see
).
4.
Replace the display assembly (see
Replacing the Display Assembly
Back to Contents Page
1
conductive tape
2
display board connector
3
back of display panel
4
display panel cable
Advertising