Cabletron Systems E1100 - Manual (Page 14)

Page 2-4
INSTALLATION
JP2
ROM
Enable JP1
I/O Base
Address
Boot PROM
Socket
Figure 2-1. The E1112 Adapter
2.2.4 Preparing the E2100 for Installation
The E21xx Series employs a socket for an optional Boot PROM. All
parameters except the I/O base address and PROM base address
are set through software. Instructions are included for setting the
I/O base address, and installing the Boot PROM. Figure 2-2, an
E2112 adapter, shows the locations of the jumpers and Boot
PROM socket. Boot PROM addressing is covered in the
installation instructions included with the Boot PROM.
JP2
ROM Enable JP1
I/O Base Address Boot PROM Socket
Figure 2-2. The E2112 Adapter