Dell LCD TV W3202MJ - Manual (Page 30)

30 Using the TV Menu
www
.de
ll
.co
m |
sup
por
t.d
e
ll
.c
om
FILE LOCATION: C:\Documents and Settings\parksh2\¼ŸЭ¡ »¦³И\Ч¢¡ж\Dell\W3202_3706MH_DAO_OM\MH_DAO_proof
D E L L C O N F ID E N T IA L – P R E L IM I N A RY 1 0 / 7/ 0 5 – FO R PR O O F O N LY
Setup
Setup allows you to adjust the appearance of the TV Menu, preset viewable cable channels, change
the language of the TV Menu (see "Selecting Your TV Menu Language" on page 24), and to
restore factory settings.
In the TV Menu Settings menu, use TV Menu
Hold Time to increase or decrease the amount
of time the TV Menu appears.The maximum
amount of time is 60 seconds.
You can select
TV Button lock to lock the
buttons on the bottom panel. When this option
is enabled, only the power button functions.
Hold the volume up and the channel up
buttons together for 10 seconds to unlock the
buttons.
Channel Setup allows you adjust the settings
for individual channels and preset the viewable
channels. Select Antenna/Cable to select the
antenna or cable connected to your TV.
If you are using the
Digital TV input source, you can preset the viewable channels. Select Channel
Search to search the viewable channels. While searching the channels, press the Menu or OK
button on the remote control to stop the searching. Select Channel Edit to edit the channels. If
the signal is weak or distorted, select Fine Tuning to fine-tune the channel manually.
If you are using the TV IN connector, you need to preset the viewable channels for the Digital TV
input source.
Timer Settings allows you to set the time which the TV turns on and off automatically.
Select
Closed Caption to turn on and off closed captioning and set several other CC options.
W3202_3706MH_DAO_PROOF.book Page 30 Friday, October 7, 2005 2:26 PM