Dell Latitude XT2 (Early 2009) - Manual

Enabling Multi-Touch on Your
Dell™ Latitude™ XT2 With
Microsoft
®
Windows
®
7
NOTE:
If you purchased your computer with Windows 7 pre-installed,
the multi-touch feature is factory enabled.
Your Dell Latitude XT2 does not support the multi-touch feature when you
upgrade to Windows 7.
To enable the multi-touch feature:
1 Disable the firewall and antivirus software.
2 Download and install the N-Trig multi-touch software from the Dell Support
website at support.dell.com.
NOTE:
The N-Trig multi-touch software for Windows 7 is not compatible with
Microsoft Windows Vista
®
or Microsoft Windows XP.
__________________
Information in this document is subject to change without notice.
© 2009 Dell Inc. All rights reserved. Printed in the U.S.A.
Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc.
is strictly forbidden.
Trademarks used in this text: Dell, the DELL logo, and Latitude are trademarks of Dell Inc. Microsoft,
Windows, and Windows Vista are either trademarks or registered trademarks of Microsoft Corporation in
the United States and/or other countries.
Other trademarks and trade names may be used in this document to refer to either the entities claiming the
marks and names or their products. Dell Inc. disclaims any proprietary interest in trademarks and trade
names other than its own.
September 2009